Renew Shine and Protection on Commercial Floors
Floor Stripping & Waxing in Jacksonville for vinyl and commercial flooring dulled by old wax buildup and heavy foot traffic
CARIT Solutions strips old wax layers and applies high-quality wax to vinyl and commercial flooring in Jacksonville businesses and facilities, restoring shine and creating a protective surface that resists scuffing and wear. You need this service when floors look yellowed or hazy despite regular mopping, when scratch marks and traffic patterns show through the finish, or when the wax layer has become uneven and difficult to clean. The process removes all existing wax and buildup, then rebuilds the protective coating to improve both appearance and durability.
Wax accumulates unevenly over time, especially in corners and low-traffic areas, while high-traffic zones wear down to the bare floor. This creates a mottled appearance and leaves the floor vulnerable to staining and damage. CARIT Solutions uses professional stripping solution to dissolve all layers of old wax, exposing the original floor surface. Once the floor is clean and dry, multiple coats of high-quality wax are applied in thin, even layers, creating a durable finish that protects the flooring material underneath and simplifies daily cleaning.
If your commercial floor looks dingy despite nightly cleaning, or if you notice wax buildup along baseboards and in corners, contact CARIT Solutions to schedule a floor stripping and waxing service in Jacksonville.
What Happens During Floor Stripping and Wax Application
You start by clearing the floor of furniture, equipment, and any movable items so the entire surface is accessible. CARIT Solutions applies stripping solution and agitates it with a floor machine equipped with a stripping pad, breaking the bond between the old wax and the floor. The resulting slurry is vacuumed up using a wet vacuum, and the floor is rinsed thoroughly to remove all traces of stripper and dissolved wax. The surface must dry completely before waxing begins, which typically takes one to two hours with proper ventilation.
After waxing, you will see a uniform, glossy finish that reflects light evenly across the floor. Scuff marks and dull traffic patterns disappear under the fresh wax, and the floor feels smooth and sealed rather than sticky or rough. CARIT Solutions applies three to five coats of wax, allowing each coat to dry before applying the next, building a durable protective layer that extends the floor's lifespan. The finished floor is ready for light foot traffic within a few hours, but heavy use or furniture placement should wait until the wax fully cures, usually overnight.
This service does not repair scratches, gouges, or damage to the flooring material itself. It focuses on removing old finish and applying a fresh protective layer. Floors with significant wear or structural damage may need resurfacing or replacement before waxing can deliver the expected results. Regular stripping and waxing every six to twelve months maintains appearance and protects the underlying material from moisture and abrasion.
Common Questions About Floor Stripping and Waxing
Business owners and facility managers often ask about timing, costs, and maintenance before scheduling floor care services. The following answers clarify the process and set practical expectations.
How often should commercial floors be stripped and waxed?
High-traffic areas like retail stores or offices typically need stripping and waxing every six to twelve months; lower-traffic spaces may extend the interval to twelve to eighteen months depending on wear.
What is the difference between stripping and buffing a floor?
Stripping removes all existing wax and starts fresh, while buffing polishes the current wax layer to restore shine; buffing works only when the underlying wax is still intact and relatively clean.
Why does wax yellow or discolor over time?
Wax yellows when exposed to sunlight, cleaning chemicals, or dirt that embeds in the layers; stripping removes the discolored wax and allows a fresh, clear finish to be applied.
When can the floor be used after waxing is complete?
Light foot traffic is safe after a few hours, but moving furniture or allowing heavy use should wait until the wax cures fully, which takes twelve to twenty-four hours depending on ventilation and humidity in Jacksonville.
What should be done to maintain a freshly waxed floor?
Sweep or dust mop daily to remove abrasive dirt, damp mop with a pH-neutral cleaner as needed, and avoid harsh chemicals or abrasive scrubbing that strip the wax prematurely.
CARIT Solutions provides floor stripping and waxing services throughout Jacksonville for commercial properties that need professional floor care to maintain safety, cleanliness, and appearance. Reach out to arrange a service appointment and discuss scheduling that minimizes disruption to your operations.